可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Perceptual models of uncertainty for socio-hydrological systems: a flood risk change example     

Ida K. Westerberg  Keith J. Beven  Gemma Coxon  Tobias Krueger 《水文科学杂志》2020,65(Z2):1705-1713

ABSTRACT

Characterizing, understanding and better estimating uncertainties are key concerns for drawing robust conclusions when analyzing changing socio-hydrological systems. Here we suggest developing a perceptual model of uncertainty that is complementary to the perceptual model of the socio-hydrological system and we provide an example application to flood risk change analysis. Such a perceptual model aims to make all relevant uncertainty sources – and different perceptions thereof – explicit in a structured way. It is a first step to assessing uncertainty in system outcomes that can help to prioritize research efforts and to structure dialogue and communication about uncertainty in interdisciplinary work.  相似文献   

Modification and discussion of the Green-Ampt model for an evolving wetting profile   总被引：1，自引：0，他引：1  

Qiyong Zhang  Yuzhen Kong 《水文科学杂志》2020,65(12):2072-2082

ABSTRACT

The Green-Ampt (GA) model has been widely used to evaluate soil water infiltration. While a simple piston profile is commonly used, the wetting profile of a soil changes during infiltration and a quarter-ellipse has been found to better describe its evolution. This study aims to improve the GA model and discuss the model parameters when the quarter-ellipse profile is utilized. The soil column is divided into three zones: saturated, transient and dry. The variable γ is introduced to express the ratio of the saturated zone depth to the wetting front depth. A modified GA model is derived via mathematical methods, but an exact solution is difficult to obtain. Therefore, a simplified (SGA) model is developed via a segmented method. Compared with the measured results, the SGA model is more accurate than the traditional model. Finally, the model parameters are discussed and a value of γ = 0.5 is recommended.  相似文献   

A comparison of methods to estimate groundwater recharge from bare soil based on data observed by a large-scale lysimeter     

Zaiyong Zhang  Wenke Wang  Chengcheng Gong  Ming Zhang 《水文研究》2020,34(13):2987-2999

Effectively estimating groundwater recharge is critical to manage water resources, especially in arid and semi-arid regions as impacted by intensive human activities and climate changes. Rare insights have been gained into groundwater recharge since direct observation is hard to carry out. Although several methods are currently available to estimate groundwater recharge, the estimated results may cover noticeable bias. The behaviours of different methods based on different conceptual frameworks and exhibiting different levels of complexity should be examined to estimate actual groundwater recharge. This study aims to assess the performance of four common methods to estimate groundwater recharge. For this end, large-scale lysimeters equipped with soil water content sensors and water table sensors were set up at a research site established in Guanzhong Basin of China. The data achieved by 1-year observation were employed to compare four estimation methods. As revealed from the results, the following findings are drawn. (a) Groundwater level fluctuation (GLF) method is simple, whereas its accuracy is determined by specific yield, and adopting a water balance method to estimate specific yield can considerably enhance the accuracy of GLF. (b) The calibrated numerical model can obtain the optimal result compared with the other methods, whereas long-term observation data are required for parameter calibration. (c) In the water balance method, the maximum entropy production (MEP) model and a practical method (estimating evaporation between two rainfall events) were used to calculate evaporation. As indicated by the results, water balance method combined with MEP is capable of obtaining more reliable results of groundwater recharge compared with the practical method. (d) With an analytical model based on linearized Richards' equation, accurate results can be achieved. What is more, the analytical model only needs the measurement of soil moisture near the surface. The limitation of this method is that it is difficult to determine the maximal water flux. The mentioned findings are of critical implications to the management and sustainable development of groundwater.  相似文献   

分布式数据库Greenplum在地震前兆数据存储中的应用     

陈晓琳  李盛乐  刘坚  刘珠妹 《地震研究》2020,(2):412-416,418

随着地震前兆观测台网的加密、采样率的提高,地震前兆观测数据量也在快速增加。在进行地震数据共享服务时,需要快速获得大量数据集,无疑对前兆共享数据库的数据处理能力提出了更高的要求。针对这一问题,提出基于Greenplum数据库的地震前兆数据存储设计方案。通过搭建Greenplum分布式数据库环境,实现了海量前兆数据的快速处理,并与传统Oracle数据库进行对比,结果表明:Greenplum数据库读取前兆数据耗时更低,对于大批量数据的读取操作,Greenplum数据库的优势更加明显;Greenplum数据库良好的可扩展性和对应用编程接口(JDBC、ODBC)的支持,使得其在前兆数据分析处理中的应用前景广阔。  相似文献   

强震下混凝土剪力墙受弯模拟及测试实验研究          下载免费PDF全文

戴勤友  张正瑞 《地震工程学报》2020,42(2):337-344

为提高混凝土剪力墙受弯性能计算的准确度,开展强震下混凝土剪力墙受弯性能试验研究。选取1个混凝土剪力墙对比试件和3个测试试件作为研究对象,对试件施加垂直荷载和水平荷载,模拟强烈地震作用力。试验前期准备工作完成后,建立分离式有限元模型,通过计算混凝土在受压和受拉状态下的损伤弹塑性刚度,完成对有限元模型中混凝土塑性损伤分析,在此基础上,计算混凝土剪力墙受弯承载力。利用有限元模型对3个测试试件进行模拟试验,结果表明,强烈地震后3个试件的荷载-位移曲线均与实际位移值接近,且混凝土剪力墙受弯承载力试验结果与实际值的误差在2%以内,表明试验研究方法具有一定的可行性,数值模拟结果较为准确。  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献